Toggle Menu

Boiler repairs

At the London Plumbing Company we are highly skilled Boiler Engineers with a vast experience in repairing faulty boilers. We cover a wide range of boiler makes and have also completed a wide range of extensive courses by boiler maufacturers which enables us to repair almost any boiler that we encounter.

If you have been told that your boiler can't be fixed or you can't get parts for it anymore, please give us a call and we will do our upmost to get the parts needed and repair it.

Please contact us via our contact tab on our home page or call us on 02085824492

 

Landlord's Gas Safety Inspection (CP12) plus Gas Boiler Service

At the London Plumbing Company we believe in prolonging the life of your boiler, it is essential to have your boiler serviced every 12 months to identify problems that could be arising and to save the cost of faults that could have been avoided when checks are made on service. With rented property’s it is a requirement by law that the landlords have a gas safety check (CP12) issued every 12 months. This comprises of the checks listed below (no cleaning of boiler parts is done on a CP12 only on boiler services or on request we do the full package).

  • Check the appliance for gas tightness
  • Check the standing and working pressure if test points are available
  • Check the burner pressure / gas pressure against the manufacturer's data plate
  • Check for the satisfactory provision of all necessary ventilation
  • Test the flue flow to ensure removal of products of combustion
  • Check the satisfactory operation of safety devices
  • Check for physical stability, presence and effectiveness of brackets (where appropriate)
  • Investigate any evidence of unsafe operation and report to the landlord
  • Issue landlord gas safety record

Arranging your gas safety inspection (CP12) or Service

Please contact us via our contact tab on our home page or by calling us on 020 8582 4492

A full gas boiler service, which will include the following:

  • Visual check on flue ways and terminal
  • Clean the burner and pilot light
  • Clean and lubricate fan where applicable
  • Clean and adjust the ignition components
  • Clean and visually check heat exchanger
  • Check all disturbed gas connections
  • Check all safety devices
  • Verify gas pressure and heat input
  • Check operating pressure and reset if required
  • Check seals (gas and water)
  • Test open flued boilers for spillage

Full operational check and advice provided on using your heating more efficiently.

Up Arrow